It’s one of the most common questions we get: if the power goes off in winter, can a portable power station keep the heater going? The short answer is not really, for a normal electric heater. But there are much better ways to use a power station to keep warm, and they work surprisingly well.
Here’s the maths, in plain English.
Buttons on this page go to Amazon. If you buy through them we may earn a small commission, at no extra cost to you. Prices, review counts and star ratings are from Amazon UK when we checked in November 2026.
Why heaters and power stations don’t mix
Electric heaters are some of the most power-hungry things in your home. A typical fan heater uses 2,000 watts (2kW). A portable power station stores a limited amount of energy, measured in watt-hours (Wh). A popular 1kWh model like the EcoFlow DELTA 3 Plus stores 1,024Wh.
Divide one by the other and you get the runtime. After allowing for the energy lost converting the battery’s power to mains electricity (roughly 15%), a 1kWh power station gives you about 870Wh to use. That’s:
- A 2,000W fan heater: less than half an hour, and most 1kWh power stations can’t supply 2,000W anyway. The DELTA 3 Plus, for example, is rated at 1,800W.
- A heater on its 1,000W setting: under an hour.
Even a big 2kWh power station, like the EcoFlow DELTA 3 Max, would run a 2kW fan heater for under an hour. And recharging it from a solar panel in a British winter takes days.
How long will a power station run each type of heating?
These are rough figures for a 1kWh power station, allowing for about 15% conversion losses. Your own results will vary with your heater’s setting and how often its thermostat switches it on.
| What you’re running | Typical power | Rough runtime on 1kWh |
|---|---|---|
| Fan heater | 2,000W | Under 30 minutes, if it runs at all |
| Oil-filled radiator | 1,500 to 2,500W | Under 40 minutes |
| Small heater on a low setting | 500 to 1,000W | About 1 to 1.5 hours |
| Heated throw on full | about 150W | About 5 to 6 hours |
| Heated throw on a medium setting | about 75W | About 11 hours |
| 12V heated blanket (from the car socket) | about 50W | About 15 to 18 hours |
| Hot water bottle | none | All night, no power needed |
The better way: heat yourself, not the room
A heater warms the air in a whole room, which takes a lot of energy, and most of it escapes through the windows and walls. A heated throw or electric blanket puts the heat right where you are, and uses a fraction of the power.
Most heated throws use somewhere between 80 and 150 watts on their highest setting, and Which? found that heated throws cost between 2p and 4p an hour to run on full. On a 1kWh power station, that means a whole evening of warmth, or longer, on one charge, safely indoors and with no fumes.
See our picks of the best heated throws to run from a power station.
Use the 12V socket if you can
Most power stations have a 12V car-style socket. A 12V heated blanket, made for cars and campervans, runs straight from it. That skips the power station’s mains inverter, which wastes energy, so your battery lasts longer.
What about a petrol generator?
A petrol generator can run a heater, but it must only ever be used outdoors, well away from doors and windows, because of the risk of carbon monoxide poisoning. It’s noisy, needs fuel, and isn’t an option for most flats and terraced houses. See our power station vs petrol generator comparison.
So is a power station worth it for winter?
Yes, but not to replace your heating. In a winter power cut, a 1kWh power station can keep your fridge-freezer, Wi-Fi, lights and phones going, and run a heated throw for the evening. That makes a long power cut far more bearable.
If you want to work out what size you need for your own kit, try our free power station size calculator, or see the best power station for power cuts.
Frequently asked questions
Can a power station run a 2kW heater?
Only the biggest ones can supply 2,000W, and even a 2kWh unit would run it for under an hour. It’s not a practical way to heat a room.
Can a power station run an electric blanket?
Yes, easily. Electric blankets and heated throws use roughly 40 to 150W, so a 1kWh power station can run one for many hours.
Can a power station run an oil-filled radiator?
Not for long. Oil-filled radiators use 1,500 to 2,500W, so they’d drain a 1kWh power station in well under an hour.
What’s the most efficient way to keep warm with a power station?
Use a heated throw or electric blanket rather than a heater, and if you can, use a 12V blanket in the power station’s car socket to avoid inverter losses.
FREE PRINTABLE